Drywall Finishing & Repair
Finishing
Read more
Drywall in Frederick & Central MD
Drywall Installation
Drywall installation for homes across Frederick and Central Maryland — whole-house, basement, addition or a single room. Board hung tight, screwed off correctly and laid out so there are fewer joints to finish in the first place.
Licensed & insuredFree written estimatesFrederick-based crewClean-site guarantee
Quick answer
How much does drywall installation cost per square foot in Maryland?
Hanging alone generally runs about $0.60 to $1.20 per square foot of board. Hung and finished to a standard level 4 — ready for paint — is more typically $2.00 to $3.50 per square foot depending on ceiling height, access and how cut-up the space is. Your number comes from a walkthrough, not a calculator.
The work
What drywall actually involves.
Most of what people call a bad drywall job is decided at the hanging stage, not the finishing stage. Seams landing in the middle of a wall, butt joints stacked up under a light, board hung loose over a bowed stud — no amount of mud fixes any of that, it just buries it until the light hits it right.
We plan the sheet layout before the first board goes up: longest sheets available, joints staggered, butt joints kept away from the sightlines that matter, and the right board specified for the room.
Walls, ceilings and stairwells
Staggered joints, tight seams
Moisture- and fire-rated board
What drywall costs in Maryland
Hang-only pricing for Maryland. Hanging plus a full level-4 finish typically lands at the combined range — see the finishing page for that side.
- Hang only
- $0.60 – $1.20 per square foot of board
- Hang and finish, level 4
- $2.00 – $3.50 per square foot
- Average bedroom, hung and finished
- $900 – $1,800
Ranges, not quotes. Real numbers come from a walkthrough — access, condition, height and finish level move a price more than square footage does. Estimates are free and in writing.
Get your numberFull drywall cost guide for MarylandPrefer to just talk?
Call and describe the job. You’ll get a straight answer on whether it’s something we do and roughly what it runs.
(301) 524-1729
Self-performed
Drywall Installation
What’s included
Everything the drywall scope actually covers.
Written into the estimate, not assumed. If something on your job is not on this list, it gets priced and named before anyone starts.
Sheet layout planned first
01Longest practical sheets, joints staggered, butt joints kept out of raking light and away from focal walls.
Walls, ceilings and stairwells
02Ceilings hung first and screwed to spec, stairwells and high walls staged and braced properly rather than improvised.
The right board for the room
03Moisture-resistant board in bathrooms and laundries, cement board behind tile, fire-rated board where the assembly calls for it, 5/8 on ceilings to resist sag.
Fastening done to spec
04Screws set to depth — dimpled, not broken through the paper — on correct spacing, which is what stops pops appearing in year two.
Cutouts that fit
05Boxes, cans and vents cut from real measurements so the plate covers the hole and the finisher is not filling a crater.
On the job
Drywall work across Frederick & Central MD.
What the trade looks like at each stage. Photos of our own recent jobs come out at the walkthrough, on the actual house.
Straight answers
Drywall questions
Not covered here? Call and ask — you’ll get a real answer, not a “depends on the job”.
Hanging an average bedroom is usually a day. Finishing is the long pole: three coats with drying time between them means most rooms are four to six working days end to end, and rushing the drying is the single most common cause of cracked joints later.
Half-inch on walls as standard, and 5/8 on ceilings — the extra stiffness is what stops a ceiling sagging between joists over time. We will use 5/8 on walls too where a fire-rated or sound assembly calls for it.
Yes. Moisture-resistant board in bathrooms and laundry rooms as a minimum, and cement board or a proper waterproof backer anywhere tile is going into a wet area — standard board behind a shower tile is a failure waiting to happen.
That is most of what we do. Floors get covered, doorways get sealed with zip walls, and we cut outside where practical. A renovation in a lived-in house is a dust-control problem as much as a drywall one.
Talk to the people doing the work
Get a straight number for the whole job.
Tell us what needs doing. We’ll walk it with you, sequence every trade it touches, put the price in writing, and leave you to decide.
Get a quote
Let’s price your project.
Two short steps. No obligation, no pressure — just a clear number and a straight answer about what the job involves.
Tick as many as you like. Most jobs are two or three of them at once, and I sort out the detail when I come and look. Nobody gets turned away for choosing the wrong box.
